Inconel X750 Spring

Material Type: Inconel X750
Material Group: Nickel Base Alloy Wire

Inconel X750 Springs Description:

Cold drawn and precipitation hardened after fabrication. Alloy X-750 has good corrosion resistance at elevated temperatures. A high-strength nickel-chrome aluminum alloy. Inconel X750 is not suited for extension springs requiring initial tension.

Available Inconel X750 Spring Material Forms:

Wire: Yes Strip: Yes Sheet/Plate: Yes

Inconel X750 Engineering Data:

E Mpa	214,000	Min Size (in)	0.004
E psi	31,000,000	Max Size (in)	0.500
G Mpa	79,300	Min Size (mm)	0.100
G psi	11,500,000	Max Size (in)	12.500
Density g/cm³	8.250	Surface Min	b
Density lb/in³	0.298	Max Temp °C	595
Conductivity	1	Max Temp °F	1100

All materials specifications are provided for general reference purposes only.

Inconel X750 Springs Application:

Inconel X750 Springs Notes:

E Mpa	Young's Modulus	These factors can vary with cold work, heat treating and operational stress.
E psi
G Mpa	Modulus of Rigidity
G psi
Conductivity	% IACS
Surface Min	Typical Surface Quality	a	Maximum defect depth: 0 to 0.5% of d or t
		b	Maximum defect depth: 1.0% of d or t
		c	Defect depth:less that 3.5% of d or t
Min Size	Sizes commonly available for wire or strip	Special sizes may be available at additional cost.
Max Size
Max Temp	Maximum service temperature	May vary due to operating stress