Material Type: Phosphor Bronze (A)
Material Group: Copper Base Alloy Strip
Bronze Springs Description:
Cold rolled. Good corrosion resistance and electrical conductivity.
Available Bronze Springs Material Forms
Wire: No Strip: Yes Sheet/Plate: Yes
Engineering Data
| E Mpa | 103,000 | Min Size (in) | 0.003 |
| E psi | 15,000,000 | Max Size (in) | 0.188 |
| G Mpa | 43,000 | Min Size (mm) | 0.080 |
| G psi | 6,300,000 | Max Size (in) | 5.000 |
| Density g/cm3 | 8.860 | Surface Min | b |
| Density lb/in3 | 0.320 | Max Temp °C | 95 |
| Conductivity | 15 | Max Temp °F | 200 |
All materials specifications are provided for general reference purposes only.
Bronze Springs Application:
Bronze Springs Notes:
| E Mpa | Young's Modulus | These factors can vary with cold work, heat treating and operational stress. | |
| E psi | |||
| G Mpa | Modulus of Rigidity | ||
| G psi | |||
| Conductivity | % IACS | ||
| Surface Min | Typical Surface Quality | a | Maximum defect depth: 0 to 0.5% of d or t |
| b | Maximum defect depth: 1.0% of d or t | ||
| c | Defect depth:less that 3.5% of d or t | ||
| Min Size | Sizes commonly available for wire or strip | Special sizes may be available at additional cost. | |
| Max Size | |||
| Max Temp | Maximum service temperature | May vary due to operating stress | |
